Skip to main content

Installation Kit

Prior to leaving for a logger installation, ensure that the installation kit contains the following:

  • NMEA 2000 T-splitters (single or 2-way)

    image.png (single) image.png (2-way)

     

  • NMEA 2000 drop cables (1-m or 0.5-m, of the correct connector either 0183, 2000 type N or 2000 type R)

    image.png

  • Tape measure
  • Outdoor double-sided Velcro
  • Pens
  • Blank MOU (if not already filled out - see Templates for examples)
  • Offset worksheets (if not already filled out - see Templates for examples)
  • Metadata forms (if not already filled out - see Templates for examples)
  • Logger + backup (of the correct connector - either 0183, 2000 type N, or 2000 type R)
  • MicroSD card with Config file already loaded (linked YDVR here, example in Templates)

Optional and backup supplies:

  • NMEA 2000 elbow connector

    image.png

  • NMEA 2000 terminator cap

    image.png

  • NMEA 2000 power isolator

    image.png

  • Thru bolts

    image.png

  • Screw drivers
  • Pliers
  • Zip ties
  • Scissors
  • Electrical tape
  • Duct tape
  • Epoxy
  • Desiccant packets
  • Cleaning solvent
  • Cleaning wipes/rags

Back to top